"The Best Feeling Water"

Salt Pure® Process

CHEMICAL REACTION AT CELL

Reaction That Takes Place In Salt Pure Cell

The Numbers Below Correspond To "The Chemical Reaction at cell Diagram" 

1.   Sodium Chloride (Salt) Added To Pool Water.

2.   Anode Of Cell Makes Hypochlorous Acid And Hydrochloric Acid.

3.   Cathode Of Cell Makes Sodium Hydroxide And Hydrogen Gas

(The Hydrogen Gas Bubbles Through The Pool Water Into

the Atmosphere).

4.   Hypochlorous Acid From The Anode Combines With The Sodium Hydroxide From The Cathode To Make Sodium Hypochlorite Or Liquid Chlorine When Mixed With The Pool Water Going Through The Cell

5.   Hydrochloric Acid From The Anode Combines With The Sodium Hydroxide From The Cathode To Make Sodium Chloride (Salt) Which Is Re-Used By The Cell.

6.   Liquid Chlorine At A P.H. Of 7.4 Goes Half To   Hypochlorous Acid And Half To Sodium Hydroxide.

7.   Hypochlorous Acid Combines With Soil, Bacteria, Algae, Organics And Uv's To Convert To Hydrochloric Acid-

8.   Hydrochloric Acid Combines With Sodium Hydroxide Forming Sodium Chloride (Salt) Again Which Is Re-Used By The Cell.

This Is Called A Closed Loop System Because The Salt Is Used Over And Over Again And Is Only Lost Through Splash Out, Backwashing, And Rainfall.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

top of page

TMI Salt Pure Corp. - PO Box 433 Manchester, WA 98353 - 1 (800) 818-8266
© TMI Salt Pure Corporation, All rights reserved

e x o g r a p h i c s . c o m