How does it work?

“The Salt Pure® system has saved us hours of labor because the chemical balance of the pool stays stable. With the Bromine feeder system we were very often out of balance needing to add chemicals to lower or raise alkalinity or hardness. Our ph seems to stay stable also. We no longer have to work with dangerous chemicals and the water is crystal clear. We haven't been getting complaints about red eyes either. All in all, we would not hesitate to do it again, it has been a time saver and a money saver as well as getting rid of lots of complaints”.

Sand Point School, Aleutians, AK

Chemical Reaction at Cell

               Diagram

               Description

 

How Does It Work?

TMI Salt Pure® systems provides your own self-contained, compact Sanitizing System, which fulfills all of your pools sanitizing needs.

How? By producing chlorine from a small amount of salt that is added to the pool water. This process is known as "Electrolytic Generation". Not only is chlorine generated from this process but the chlorine generated then converts back to salt to be used over and over again.

Step 1.   Just Add Salt (only 3,000 ppm)

Let's compare...

• 3,000 ppm

salinity equals one heaping teaspoon of salt in one gallon of water.

• 7,200 ppm

salinity equals a teardrop which is 2 ½ times the level of salt in a Salt Pure® pool.

• 36,000 ppm

salinity equals ocean water which is 12 times the level of salt in a Salt Pure® pool.

Step 2.  Turn on the TMI Salt Pure® system
As salt in the water passes through a Salt Pure® cell, it converts to Sodium Hypochlorite where it continuously shocks out chloramines and organics while maintaining the desired sanitizer level.

Step 3.   Sit back and relax!
Sodium Hypochlorite kills bacteria and algae then converts back to salt. This is called a closed loop system because the salinity in the pool water is used over and over again.

top of page